北京激光切割加工,北京不锈钢加工
首  页 新闻动态 经营范围 产品展示 成功案例 联系我们
设备展示
北京激光切割加工,北京不锈钢加工
北京激光切割加工,北京不锈钢加工
公司地址: 北京市丰台区南三环方庄桥东鑫源国际大厦1号楼1809室
联系电话: 010-87607030(制品部)
010-87606030(激光部)
010-67909340(销售部)
传  真: 010-87607230(制品部)
010-87605730(激光部)
公司邮箱: [email protected]
联系人: 康先生
新闻动态
彩色不锈钢加工主要工艺

                          来源:奥康盛泰 发布时间:2014-01-26 作者:北京不锈钢加工

     彩色不锈钢加工工艺就是利用这层膜形成指定的颜色。由于不锈钢利用了这层始终存在的膜,所以既不退色,也不需要像油漆一样经常维护。彩色不锈钢还可以进行成型处理,即使在锐弯处也不会对颜色有任何不良影响。
1.手工雕刻。采用金刚石刀刃雕刻出各种图案,图纹精度差,劳动强度高,工作效率低。手工雕刻适用于精度要求不高的凹凸表面装饰。
2.电化学腐蚀加工。在适当的电化学腐蚀液中使用辅助电极,对已覆盖有花纹图案抗蚀膜的工件表面进行腐蚀加工,从而得到蚀刻的花纹图案。蚀刻速度较快,形成的图纹较深,需要使用专门的仪器及设备。
3.机械铣切。使用机械设备,如雕刻机、仿形刻印机,操纵旋转的刀具进行铣切。这种方法只能在平面钢板上刻印。容易进行深度铣刻。
4.喷砂法。利用压缩空气将高速金刚砂喷射在被花样模板挡住的工件表面上,形成砂面花样图案。喷砂法制出的表面较粗糙,不易喷出细条的图案,深度一般不大于0.08mm.
5.化学腐蚀加工。通过各种印刷技术或照相制版,在工件表面上形成有花纹图案的抗蚀膜,在适当的腐蚀液中进行腐蚀蚀刻。去膜后得到精度较高的图案。适合大批量生产。蚀刻深度可达0.02~0.05mm。
6.压印法。有字模、模具或圆辊等施加压力,迫使局部材料塑性形变而得花纹。压力加工有冲压法、静压法或滚压法等。压印后存在内应力,其应力和形变依上诸法递减。压印深度一般可达0.05~0.20mm,称为有应力永久性标印。

    彩色不锈钢是一种环保的装饰材料,不含甲醇等有机物,无辐射,安全防火,适合大型建筑装饰(汽车站、火车站、地铁站、机场等)、酒店和大厦商务装饰、公共设施、新居装饰等。文章关键词:不锈钢加工,北京不锈钢加工
Color process is the use of this layer of film forming a specified color. Because the stainless steel by using this layer there is always the film, so it does not fade, do not need the same as the paint regular maintenance. The color of stainless steel can also be used for molding processing, even at the sharp bend also does not have any adverse effect on the color.
1 hand carved. The diamond blade carving out a variety of patterns, patterns of poor accuracy, high labor intensity, low work efficiency. Hand carved for convex concave surface decoration on the accuracy is not high.
2 electrochemical corrosion processing. The use of auxiliary electrode in electrochemical corrosion liquid appropriate, has been covered with corrosion processing workpiece surface patterns of the resist film, and etching patterns. The etching speed, forming the pattern of deep, need to use the equipment and special equipment.
3 Mechanical milling. The use of mechanical equipment, such as engraving machine, engraving machine, copying, operated rotary tool for milling. This method can only be imprinted on the plane plate. Easy depth milling moment.
4 blasting. Using the high speed diamond spray in workpiece surface pattern template by blocking the compressed air, the formation of sand surface pattern. Surface blasting method to produce the rough, not easy to spray fine pattern, the depth of not more than 0.08mm
5 chemical etching. Through a variety of printing technology or photographic plate, forming a resist film pattern on the workpiece surface, corrosion etching in the corrosive liquid in the appropriate. To obtain the higher precision pattern after film. Suitable for mass production. Etching depth of up to 0.02~0.05mm.
6 impression method. The matrix, mold or roller pressure, forcing the local plastic deformation and patterns. Pressure processing stamping method, static method or rolling method etc.. There are internal stress after imprinting, the stress and deformation in the law of diminishing. Imprint depth is 0.05~0.20mm, called stress permanent marking.
The color of stainless steel is a kind of environmental protection decorative materials, fire safety without methanol and other organic matter, no radiation,, suitable for large building decoration (bus station, train station, subway stations, airports, hotels and commercial buildings) decoration, public facilities, new homes decoration etc.. The article keywords: stainless steel processing, Beijing stainless steel processing

                                                            下一篇激光切割在农业机械领域的应用

公司名称:北京奥康盛泰装饰工程有限公司 邮政编码:100164 Email:[email protected]
   联系电话:010-67909340(销售部) 010-87607030(制品部) 010-87606030(激光部) 传真号码:010-87607230
友情链接: 北京不锈钢加工 北京激光切割加工 不锈钢加工 激光切割加工
版权所有.2005-2006.北京奥康盛泰装饰工程有限公司(网站地图)